Product

It is a light cantilever crane fixed on a wall or pilaster, or it can run along an elevated track on a wall or other supporting structure, and does not need to occupy the plant area. More effective use of plant space.

Before installing the wall-mounted cantilever crane, check whether the product and technical documents are missing according to the packing list; check whether the cantilever beam is bent or twisted, the shaft is corroded, or bumped during transportation. In addition, every six months Rotating parts such as shafts and bearings should be cleaned and lubricated. Cantilever installation cantilever installation, please follow the following order. 1) Drill holes on the workshop column according to the corresponding position in the drawing; 2) Lift the cantilever with a crane, fix the cantilever with the upper and lower support plates with fixing bolts, measure the upper deflection with a level, and then tighten the nut on the rotating shaft in a clockwise direction. 3) Install electric hoist, walking trolley and slewing device on the cantilever beam track. 4) Install a C-shaped track on the top of the cantilever beam. There is a self-made sliding trolley in the C-shaped track, and it should be on the same side as the electrical control box. 5) All electrical appliances on the cantilever beam shall be connected and installed with power cords of appropriate length. The C-type track block and the cable are respectively tied and fixed with a binding wire.