صالة عرض

Precautions for Using Electric Wire Rope Hoist

رافعة حبل الأسلاك الكهربائية is a small lifting equipment with the advantages of compact structure, light weight, small size, strong versatility of parts and components, and easy operation. It can be installed on hoist single beam, bridge crane, gantry crane, jib crane. Therefore, it is one of the commonly used heavy equipment in factories, mines, ports, warehouses, cargo yards, shops, etc., and is an essential machine to improve labor efficiency and improve working conditions.

ال رافعة حبلية سلكية صناعية that is installed for the first time or reassembled should be operated with no load first, but make sure that the components are installed well and do not power on.

The dynamic load test is to perform repeated lifting and lowering and left and right movement tests with the rated load weight. After the test, check whether its mechanical transmission part, electrical part and connection part are normal and reliable.

It is not allowed to press two flashlight door buttons that make the industrial wire rope hoist move in opposite directions at the same time.

After the work is completed, the main switch of the power supply must be pulled open to cut off the power supply. During use, if a fault is found, the main power supply should be cut off immediately.

ال 1 ton wire rope hoist should be operated by a dedicated person, and the operator should fully master the safety operating procedures. It is strictly forbidden to pull or lift it crookedly.

During use, the 1 ton wire rope hoist must be checked regularly by a dedicated person, and timely measures should be taken when a fault is found, and it should be carefully recorded.

Sufficient lubricating oil must be maintained during use, and the lubricating oil should be kept clean and should not contain impurities and dirt. When oiling the wire rope, a hard brush or a small piece of wood should be used. It is strictly forbidden to oil the working wire rope directly by hand.

After long-term continuous operation, the رافعة حبل الأسلاك الكهربائية may automatically power off. This is the overheating protection function of the motor. At this time, it can be lowered. After a period of time, the motor can continue to work after cooling down.