Ruang pamer

Derek Gantry Portabel Kecil dengan Kerekan Listrik

Derek gantri portabel, called portable frame gantry crane, is a light and small lifting crane with simple design, free movement, high quality and low price. The total lifting capacity of the portable gantry crane is 0.5 tons-20 tons, which can be adapted to work in small workshops, warehouses, inventory, etc. Especially in areas where the crane is required to move freely.

Features:

Mobile gantry crane provides the most flexible lifting solution.

Easily adjusted to provide different lifting heights.

Bolted beam to upright connection ensures safety.

Molded phenolic casters are standard and allow for easy movement.

Square tubing uprights, knee braces, and channel base provides stable lifting and movement.

All holes in steel with bearing loads are either punched or drilled. Flame cut holes are not permitted in these applications.

All portable frame gantry cranes have a design factor of 15% of the allowable capacity for hoist weight and 25% of the allowable capacity for impact.

The biggest advantages of the portable frame gantry crane are its all-round mobility, small footprint, reasonable steel structure design, and ability to withstand weights from 0.5 tons to 20 tons. Especially suitable for installing workshop equipment, handling and commissioning. Portable gantry cranes reduce manpower, lower production and operating costs, and improve work efficiency.

Precautions:

After the mast operation (assembly) is completed, a load test lifting should be carried out. The test hoisting includes static load and dynamic load to check the operating capacity, load-bearing capacity, stability and reliability of each system.

When lifting a heavy object for the first time, lift it to 30 cm above the ground, lower the brake again, check the performance of the brake, and only operate normally after confirming that it is reliable.

Overloading is strictly prohibited.

The gantry should be parallel, smooth and without distortion when running.

During the operation, a designated person should be designated for unified command, and other personnel should have clear division of labor and contact signals.

When the derek gantry portabel is running, it is strictly prohibited to stand under the gantry crane.