Showroom

500 kg 1 tonă 2t Macara cu braț montat pe perete

500kg 1 Ton 2t wall mounted jib crane is widely used for lifting light and small heavy objects in industrial and mining, workshop, assembly line, warehouse, wharf and other occasions.

It has the advantages of novel structure, reasonable, simple, convenient operation, flexible rotation, light weight, flexible load movement and so on. It is an energy-saving and efficient material hoisting equipment.

The 500kg 1 Ton 2t jib crane consists of a bracket, a jib device, a slewing device and an electric hoist (mainly a electric chain hoist).

The cantilever is fixed on the wall or steel structure column, and can be rotated according to user needs. The rotating part is divided into manual rotation and electric rotation. The electric hoist is installed on the cantilever track for lifting heavy objects. The electrical control box is installed on the electric chain hoist.

The operation of this jib crane is realized by the handle control button, which respectively controls the lifting, lowering, and horizontal walking of the electric hoist trolley.

Macara cu braț montată pe perete is just one type of jib crane. In addition, there are column mounted jib cranes, mobile portable jib cranes, wall travelling jib cranes, folding arm jib cranes, etc. No matter what kind of cantilever crane, the structure is not very different.

Before installing the 500kg 1 Ton 2t jib crane, it should be checked first. It is mainly to check whether the cantilever beam is bent or twisted, the shaft is corroded, or damaged during transportation. If these problems occur, they should be corrected or restored respectively.

After the installation is completed, the test run of the wall jib crane should be carried out, and the static load test and load test should be done according to the regulations. In addition, the rotating parts such as shafts and bearings should be cleaned and lubricated every six months.